A.J. Landmark Trampoline Replacement Parts:
Information you will need to know before ordering parts.
Replacement Jump Beds
Round
- A: Outside to outside diameter of frame.
- B: Jump bed fabric diameter. ( Do not include the v-ring)
- C: Total Spring count. (You can count the holes in the frame where the springs attach.)
- D: Spring length. (measure total length of spring, end of hook to end of hook, with the spring off the trampoline.)
Rectangle
- A: Length of bed, not including the v-rings.
- B: Width of bed, not including the v-rings.
- C: Spring count along length of bed.
- D: Spring count along width of bed.
Octagonal
- A: Measure width of bed, not including the v-rings.(Measure with the weave, not on the bias)
- B: Spring count per side.
- C: Spring length. (Measure total length, end of hook to end of hook, with the spring off the trampoline.)
Replacement Trampoline Pads
Round
- A: Measure diameter of frame, outside to outside.
Rectangle
- A: Measure length of frame, outside to outside.
- B: Measure width of frame, outside to outside.
- C. Measure from outside of frame to edge of bed.
Octagonal
- A: Measure width of frame, outside to outside.
- B: Measure length of one flat side, center of corner to center of corner.
- C: Repeat B on a different side.
Replacement Trampoline Springs
Measure the trampoline spring after removal from the trampoline from end of one hook to the end of the opposite hook.
“15+ years of Quality! I am a very avid user of their products. I have had a trampoline for 15+ yrs and have only replaced the mat and padding once, also a spring or 2 over the years. Everyone in my family has one I mean everyone (well there are 5+ mine).”
Kate M.